Extended Service Valve to Accommodate Press Fittings
High & Low Pressure Switches
Outdoor Temp Sensor Factory Installed
Factory Charged w/ R410A Refrigerant
Long Line Set Capability (refer to spec sheet for details)
Low Ambient Cooling Capable w/ Optional Kit
Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
Corner Posts for Added Cabinet Strength
Coated Hail Guard Coil Protection
Post Painted (black) Coil
Coated Cabinet Screws
Internal Pressure Relief Valve & Thermal Overload
Gas Furnace
Fully insulated steel cabinet
Dehumidification feature in cooling
Certified to leak 2% or less of nominal air conditioning CFM delivered (when pressured to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed
VCT Constant Torque Variable Speed Motor
Supports Single & Two Stage A/C
Aluminized steel RPJ primary heat exchanger
Stainless Steel Secondary Heat Exchanger
Direct ignition with Silicon Nitride ignitor
Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
35” (889mm) high, for ease of installation
Four position - upflow/downflow/horizontal (left/right) installation
At least twelve different venting configurations
Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)